Saeco auLika, Руководство по эксплуатации

Страница: 57 / 62

• 51 •
Machine Installation - Service Provider Manual
PLACE A CONTAINER
UNDER MILK AND HOT
WATER SPOUTS
DESCALING
12 Place a container under the hot water wand and a large
enough container under the Cappuccinatore.
Note: Use a container of at least 1.5 litres capacity.
Press the " " button (18).
STEP 1/2 DESCALING
DESCALING
PAUSE
If you do not have a container of this capacity,
pause the cycle by pressing the "
" button (23),
empty the container, place it back in the machine and re-
start the cycle by pressing the "
" button (18).
13 At this point, the machine will start dispensing the descaling
solution at intervals (the bar shows the cycle progress).
14 When the solution in the tank is fi nished, the machine re-
quests to empty and rinse the tank with fresh drinking water.
RINSE TANK &
FILL WITH FRESH WATER
DESCALING
15 Rinse the water tank thoroughly and refi ll it with fresh drink-
ing water.
16 Insert the tank into the machine. Press the " " button (18).
17 Empty the containers used to collect the liquid dispensed by
the machine.
EMPTY DRIP TRAY
DESCALING
18 Remove any liquids from the drip tray and insert the tray
back.
Press the "
" button (18).
INSERT THE
CAPPUCCINATORE WITH
ALL THE COMPONENTS
DESCALING
19 Check that the Cappuccinatore is placed in the machine.
Press the " " button (18).
PLACE A CONTAINER
UNDER MILK AND HOT
WATER SPOUTS
DESCALING
20 Place a container under the hot water wand and a large
enough container under the Cappuccinatore.
Press the "
" button (18).
STEP 2/2 RINSING
DESCALING
PAUSE
21 The machine performs the rinse cycle.
Note: A default amount of water is needed for the
rinse phase. This allows an ideal rinse cycle to be
performed in order to ensure the best conditions to brew
products. The message about fi lling the tank for the rinse
cycle is normal, as it is part of the procedure.
Note: The rinse cycle can be paused by pressing
the "
" button (23). To resume the cycle, press
the " " button (18) again. This allows you to empty the
container or to stay away from the machine for a short
period of time.