Saeco auLika, Руководство по эксплуатации

Страница: 15 / 62

• 9 •
Machine Use - User Manual
2.1 Control Panel Description
Note: All possible controls are described here.
Refer to the following sections for the operating
modes.
Some buttons in the control panel have a double
function. The double function is only activated in
certain moments during the machine operation or when
accessing the programming mode. The additional func-
tion is indicated by the icon under the machine button.
Button - Description
17 "Espresso" button
When this button is pressed an espresso cup is brewed.
18 "Coff ee" button - 2nd Function (OK)
When this button is pressed a coff ee cup is brewed.
2
nd
Function - Press it to select the displayed option.
19 LCD Display
Displays the machine status and alarm signals, and guides the
user through the steps required to operate the machine.
20 "Cappuccino" button - 2nd Function ( )
When this button is pressed a cappuccino cup is brewed.
2
nd
Function - Press it to scroll the current page selection up.
21 "Latte Macchiato" button
When this button is pressed a latte macchiato cup is dispensed.
22 "Hot Water" button
When this button is pressed hot water is dispensed.
23 "Special Beverages" button - 2nd Function (ESC)
When this button is pressed, the menu for preparing other
types of beverages is accessed.
2 nd Function - Press it to exit the selected page and/or to stop
the beverage brewing procedure.
24 "Clean" button - 2nd Function ( )
When this button is pressed, the machine starts an automatic
quick cleaning cycle of the Cappuccinatore.
2
nd
Function - Press it to scroll the current page selection
down.
25 "Stand-by" button
When this button is pressed, the machine Stand-by mode is
activated.
3 USING THE MACHINE
Before start using the machine check that the water tank and the
coff ee bean hopper are fi lled and that the machine is properly
clean.
3.1 Switching on the Machine
Warning! Connection to the power supply should
be carried out exclusively by the service provider!
Ensure that the upper lid (1) is always locked.
Before switching on the machine, ensure that the plug is correctly
inserted in the power socket.
CLICK!
Ensure that the dispensing spout is in correct posi-
tion. Move it horizontally until you hear the CLICK
indicating correct positioning. If this is not done, some
product might leak out of the dispensing spout.
1
To switch on the machine, move the power button on the
back of the machine to "I" (Fig.02, page 3) .
2 After carrying out a check cycle, the machine goes into stand-
by mode and the " " button (25) blinks.
3 To turn on the machine simply press the " " button (25).
Note: Once the warm-up is complete, the machine
primes the circuit and performs a rinse cycle of
the internal circuits. A small amount of water is dispensed
during this process. Wait for this cycle to be completed.