Saeco auLika, Руководство по эксплуатации

Страница: 46 / 62

• 40 •
Machine Installation - Service Provider Manual
OFF
ON
With this setting, the machine will work using water from the
water network.
With this setting, the machine will work only if the tank is in-
stalled.
WATER MENU
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
WATER NET
This menu allows the correct water parameters for coff ee brewing to be set.
To change the machine water hardness setting.
With the "Hardness" function you can adjust your machine to the level of
hardness of the water you use, so that the machine will request descaling
at the right moment.
Measure water hardness as shown in section 8.14.
To activate/deactivate the warning indicating that the water fi lter should
be replaced. By activating this function, the machine notifi es the user when
the water fi lter needs to be replaced.
OFF: Warning disabled.
ON: Warning enabled (this value is automatically set when the fi lter is ac-
tivated).
To activate the fi lter after its installation or replacement. Refer to section
8.15 to correctly install and/or replace the fi lter.
To activate the function that enables machine operation with the water
network
(only for models designed accordingly).
Note: Use this function with utmost care, as a wrong setting may cause malfunctions.
The "ON" option must only be activated if the "WATER NET" kit is installed and connected properly.
Using it under any other conditions will result in a machine failure.
When the “ON” option is selected the “ENABLE FILTER” and “ACTIVATE FILTER” functions will be hidden and
will not be available for selection.
These functions are visible only if
the “WATER NET” function is set to
OFF.