Saeco auLika, Руководство по эксплуатации

Страница: 38 / 62

• 32 •
Machine Installation - Service Provider Manual
Note: The factory settings can be restored for
each single beverage and the restored settings
will be applied only to that specifi c beverage. To restore
the other beverages' settings, enter the menu and restore
the settings.
17 Press the " " button (24) to select the "DEFAULT" menu.
CAPPUCCINO
COFFEE LENGTH
MILK QUANTITY
DEFAULT
18 Press the " " button (18) for access.
RESTORE
FACTORY DATA?
DEFAULT
YES NO
Note: The restoring operation deletes the stored
data defi nitely. To quit the procedure press the
" " (23) button.
19 Press the " " button (18) to confi rm.
The beverage factory settings have been restored. Press the " "
button (23) once or more times to exit.
Visual Method
This method allows the product length to be set by the service
provider via keypad in visual mode, i.e. the product quantity is
adjusted while being brewed. This function is disabled by default,
but it can be activated in order top perform a quicker setting pro-
cedure.
1 Enter the programming mode as described in section 9.1.
MENU
CREDITS MENU
BEVERAGE MENU
MACHINE MENU
2 To select the "MACHINE MENU" option, press the " "
button (24).
MENU
CREDITS MENU
BEVERAGE MENU
MACHINE MENU
3 Press the " " button (18) for access.
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
4 Press the " " button (18) to enter the "GENERAL MENU".
GENERAL MENU
ECOMODE
STAND-BY SETTINGS
SELF LEARNING
SET PASSWORD
5 To select the "SELF LEARNING" option, press the " " but-
ton (24). Press the " " button (18) for access.
SELF LEARNING
OFF
ON
6 To select the "ON" option, press the " " button (24).
Press the " " button (18) to confi rm.
Press the " " button (23) to exit the programming mode.
When the function is active, press the button of the beverage that
you wish to set and stop the brewing process when desired, as
shown on the display. The procedure for programming a cappuc-
cino is explained as an example. Before carrying out the program-
ming procedure, prepare the machine as described in section 3.8.
7 Place a cup under the dispensing spout (Fig.12, page 3).
8 Press and hold the " " button (20) until the "MEMO"
message is displayed, then remove your fi nger. The machine is
now programming.
MEMO