!
Section Eight: Using GRQ Remote Software
Section Eight: Using GRQ-Remote Software
8.1. WELCOME SCREEN/NETWORK CHAIN SCREEN
Refer to Section Seven for instructions about installing the software and connecting your computer
to up to eight GRAPHI-Qs, or 16 channels of audio. If you use two COM ports on your computer,
you can set up two distinct networks of GRAPHI-Qs, each consisting of up to eight units. (NOTE:
one COM port chain cannot communicate directly to another, only within its own chain.)
Double click your GRQ icon and you are presented with the Welcome Screen. You can connect to your
GRAPHI-Qs, or run the software off-line for editing, printing or demonstration.
Before clicking the connect button, make sure all units in your serial chain are connected properly
(see Section 7.2). When “Connect” is chosen, you’ll get a message indicating remote connection
is in progress (this may take a moment, so be patient). If the Remote Software successfully
recognizes one or more GRAPHI-Qs in your serial chain, the following screen (Network Chain) will
appear:
