!
5.6. WHAT NOT TO DO
The GRAPHI-Q should NOT be used in the following configurations:
1.
Do NOT plug a microphone directly into the GRAPHI-Q back panel. The GRAPHI-Q is designed
for operation with line level signals only. Your microphone signal must first go through a wireless
receiver, mixer, preamp, etc. that will boost its output gain to line level.
2.
Do NOT use the GRAPHI-Q in an auxiliary or effects loop, such as would be used to add reverb
to different channels in your mixer. Effects loops are designed to split signal paths, and then mix
“wet” processed signals with the “dry” signal path. The GRAPHI-Q is designed for use as an “in line”
processor, meaning all the signal path should be routed through it.
3.
Do NOT mix balanced and unbalanced inputs and outputs to and from the GRAPHI-Q. This will
result in a reduction of signal level.
Section Five: Installation
FBX, parametric EQ, compression
and graphic EQ can be applied to
either or both outputs.