saberz Project M Chassis, Руководство по установке, Страница: 19 / 29

Saberz Project M Chassis Installation Guide S
PEAKERS
Version 1.9.5_b – September 18, 2022
•
Page 17
8 Speakers
8.1 Preparations
Use the (previously prepared) braided length of 28 AWG GREEN and WHITE which should be long enough to go from
the speaker-end of the chassis past the ProffieBoard area at the other end of the chassis.
-
White for positive (+).
- Green for negative (-).
Use a razor to remove any tabs or imperfections which could interfere with a nice flat fit of the speaker against the
chassis:
8.2 Speaker Wiring and Installation
- Solder the green wire to the speaker prong with the red mark (+) and white wire to the remaining prong (-).
- Route the braided speaker wire pair into the wire channel under the (future) battery sled and over to the
ProffieBoard area.
-
Secure the speaker into the end of the chassis with a small bead of gap-filling super glue (or e6000 glue).