Saberz Project
M Chassis Installation Guide
B
ATTERY
S
LED
I
NSTALLATION
Version 1.9.5_b
–
September 18, 2022
•
Page 16
After fitting the sled properly in place, secure it with a small amount of gap-filling super glue.
Important!
Once the glue has dried, use hobby tweezers to slide some of the green/white twisted wire back into the
speaker compartment (just enough to provide enough wire slack for later on if you need to replace a speaker in the
future).
Future note: At the end of the install, (and after the chassis is completed and tested), it is suggested to add a final
amount of gap-filling super glue to fully secure the battery holder into the chassis.