Mounting Page
15
Document id: 7000 108-011 A2
2.7
Wiring Input/Output connections
2.7.1
R4 Display cable connections
Figure 3 shows how to connect the R4 Display data and power
cables. Note that for the port designated "R4 Transponder" the TX
lines on the R4 Display should be connected to the RX lines on the
Display port of the R4 Transponder and vice versa. The TX lines for
the PILOT Plug should however be connected to the TX lines of the
PILOT Port on the R4 Transponder and the same principle applies
for the RX lines.
Note 1: Detailed wiring diagrams with cable colours are included
with the cable in the delivery package.
Note 2: The AUX port is normally not connected.
Figure 3: Wiring diagram for the R4 Display
