Ryobi RY64400, Руководство оператора

Страница: 10 / 52

6 - English
FEATURES
PRODUCT SPECIFICATIONS
Engine Size .....................................................................................................................................................................30 cc
Engine Output ................................................................................................................................................................ 1 HP
Engine Lubricant Volume..............................................................................................................................................2.2 oz.
KNOW YOUR CULTIVATOR
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
ON/STOP SWITCH
The on/stop switch controls the ignition system. The switch
must be in the on (
I ) position for the engine to start and run.
To stop, place the switch in the off ( O ) position.
PRIMER BULB
The primer bulb pumps fuel from the fuel tank to the
carburetor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.
STARTER GRIP AND ROPE
The starter grip and rope is used for starting the engine.
THROTTLE TRIGGER
The throttle trigger controls the rotation speed of the tines.
Completely engage the throttle trigger while cultivating.
UNPACKING
This product requires assembly.

Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the packing list are
already assembled to your product when you unpack it.
Parts on this list are not assembled to the product by the
manufacturer and require customer installation. Use of a
product that may have been improperly assembled could
result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.

Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.

If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
ASSEMBLY
PACKING LIST
Cultivator
4-Cycle Lubricant
Bolts (2)
Edging Tine
Edging Tine Spacer
Edging Wheel
Front Handle
Handlebar Knobs (2)
Upper Handlebar
Wheel/Drag Bar Assembly
Wheel/Drag Bar Adjustment Knob
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.