RUSH PAR 2 CT Zoom™ User Manual
9
Introduction
The RUSH PAR 2 CT Zoom™ is a bright single-lens LED PAR Can. It offers
white color temperature mixing using twelve 10 W CWUW (warm white and
ultra white) LEDs and a 10° to 60° motorized zoom. This fixture also offers
electronic dimming and strobe and features a bracket for floor or truss
mounting.
The PAR 2 CT Zoom™ can be controlled using any DMX-compliant
controller.
The fixture is supplied with a 1.5 m (5 ft.) power cable (local power plug not
included) and a folding mounting bracket.
Before using the product for the first time
1. Read ‘Safety information’ on page 4 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to an AC mains power source,
install a local power plug (not supplied) on the end of the supplied power
cable.
4. Before operating, ensure that the voltage and frequency of the local
power source match the mains power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information about the fixture. RUSH by Martin™ user manual revisions
are identified by the revision letter at the bottom of the inside cover.
When the fixture is powered on for the first time, it may smoke slightly as it
warms up, but this will only last a few minutes and is no cause for concern.
