18
RUSH PAR 2 CT Zoom™ User Manual
2. Use the DOWN and UP buttons to select FADE or SNAP. Press Enter to
confirm (or press MENU to exit without making a change).
Fixture test
Automatic tests of all effects or manual test of individual effects can be run
from the control menus.
Automatic effects test
To perform a complete test of all of the fixture’s effects:
1. Select FIXTURE TEST and press ENTER to confirm. The automatic test
will run.
2. To stop the test and exit, press MENU.
Manual effects test and single standalone scene
The Manual effects test menu can be used to test the fixture’s effects
individually and to set a single standalone scene that the fixture will show
each time it is powered on.
1. Select MANUAL TEST and press ENTER.
2. Use the DOWN and UP buttons to select an effect (White 1, White 2,
Shutter, Dimmer or Zoom). Press ENTER to confirm your selection.
3. Use the DOWN and UP buttons to change the value (000-255). This will
be the equivalent of sending this DMX value to the selected effect.
4. Press ENTER to confirm your selection and activate the effect (or press
MENU to exit).
5. If you have confirmed a selection with the ENTER button, press MENU
to return to the list of effects.
6. If you want, you can now scroll to another effect and set a value for it as
described above. This effect will be added to the effects that you have
already set.
See also ‘Single standalone scene’ below.
Cooling fan options
You can set cooling fans to run at constant low speed or automatically
regulated speed depending on whether light output intensity or quiet
operation is your highest priority.
1. Select FAN MODE and press ENTER. The currently set fan mode will
blink in the display.
2. Using the DOWN and UP buttons, toggle between the two modes:
-
If you select LOW, fans are set to constant low speed. This gives
quieter operation but light output is reduced when necessary to
control fixture temperature.
