RUSH PAR 2 CT Zoom™ User Manual
19
-
If you select AUTO, fan noise levels vary as fans control fixture
temperature, but light output is constant.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Single
standalone scene
If you power the fixture off while it is running the effect – or the combination
of effects – that you have set in the MANUAL TEST menu (see above), it will
hold that setting in memory. The next time you power the fixture on, it will
display those effects. This feature lets you set a standalone scene that runs
automatically each time the fixture is powered on.
Note that when the fixture is running a single standalone scene, it will not
respond to DMX control signals. To restore DMX operation, exit the
MANUAL TEST menu on the control panel.
Fixture information
Fixture temperature readout
To check the onboard temperature of the fixture:
1. Select TEMP and press ENTER. The display will show the temperature
of the unit.
2. Press MENU to exit.
Fixture operating time
The fixture operating time counter monitors the total number of hours the
fixture has been in operation since manufacture. To display the counter:
1. Select FIXTURE TIME and press ENTER. The display will show the time
the unit has been running.
2. Press MENU to exit.
Firmware version
To see which software version is installed in the fixture:
1. Select FIRMWARE VERSION and press ENTER. The firmware version
will be shown.
2. Press MENU to exit.
Reset
The fixture resets each time it is powered off and on, but it is possible to
force a reset at any time:
1. Select RESET and press ENTER to confirm.
2. Give the fixture time to reset.
