RUSH PAR 1 RGBW user manual
9
Introduction
The PAR 1 RGBW is a powerful LED lamp incorporating seven 10 W RGBW
long-life CREE LEDs. It provides RGBW color mixing, 32 color presets,
smooth electronic dimming, as well as strobe effects. The device is extremely
rugged, lightweight and compact, and is ideal for mobile DJ’s or small fixed
installations.
The fixture can be controlled using any DMX-compliant controller, and it has
three DMX control modes providing simple or complex control capability. It can
also function as a standalone device, running pre-programmed shows in Show
Mode, with the option of sound-activated triggering.
Before using the product for the first time
1. Read Safety information on page 5 before installing, powering, operating
or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture (see Specifications on
page 33).
5. Check the Martin Professional website at www.martin.com for the most
recent user documentation and technical information about the fixture.
RUSH by Martin user manual revisions are identified by the revision letter
at the bottom of the inside cover.
Note that when the fixture is powered on for the first time, it may smoke
slightly as it warms up, but this will only last a few minutes and is no cause for
concern.
