RUSH PAR 1 RGBW user manual
18
DMX channel modes
The fixture provides two control modes enabling varying degrees of DMX
control and enabling the efficient use of DMX channel bandwidth. Each of
these modes is documented in detail in DMX protocols on page 26 and they
are summarized briefly here:
DMX channel
mode
Description
5 channels
Individual control of red, green, blue and white channels for
color mixing, plus full range dimming.
7 channels
Individual control of red, green, blue and white channels for
color mixing, plus full range dimming. 32 color presets and
strobe effects.
To set the fixture’s DMX channel mode:
1. Select
and press the ENTER button.
2. Use the DOWN and UP buttons to select the
or
DMX
channel mode.
3. Once the mode has been selected, press the ENTER button to set it (or, to
return to a higher level of the menu structure without any change press the
MENU button).
Show mode
In the absence of a DMX control signal, show mode provides standalone pre-
programmed light shows. Show mode can be combined with sound activation
to provide a music-synchronized light show.
To set a fixture’s show mode:
1. Select
and press the ENTER button.
2. Use the DOWN and UP buttons to select one of the following shows:
Random scenes and effects (requires sound activation to be
enabled).
Shows one of ten preset colors with no scene changes (sound
activation has no effect). Colors are with full range dimming.
Color changes - fast (SP1) to slow (SP3) - (sound activation
has no effect)
