RUSH PAR 1 RGBW user manual
19
has no effect).
3. Once the mode has been selected, press the ENTER button to set (or, to
return to a higher level of the menu structure without any change press the
MENU button).
Dimmer modes
For DMX control, there are four possible settings for controlling the rate of
dimming:
LINEAR. The increase in light intensity appears to be linear as
DMX value is increased.
SQUARE LAW – light intensity control is finer at low levels and
coarser at high levels.
INVERSE SQUARE LAW – light intensity control is coarser at low
levels and finer at high levels.
S-CURVE – light intensity control is finer at low levels and high
levels and coarser at medium levels.
To set the fixture’s dimmer curve:
1. Select
and press the ENTER button to confirm. The present mode
will blink on the display.
2. Use the DOWN and UP buttons to select
,
,
or
.
3. Once the mode has been selected, press the ENTER button to set it (or, to
return to the higher level of the menu structure without any change press
the MENU button).
Sound activation