RUSH PAR 1 RGBW user manual
20
The fixture has a built-in microphone that can be used to synchronize its
behavior to the beat of music. When the fixture is not connected to a DMX
controller, and is running in Show Mode, it can be set to trigger scene changes
(effects and color changes) in synch with music.
To turn on sound activation:
1. Select
and press the ENTER button.
2. Use the DOWN and UP buttons to select
(sound activation on) or
(sound activation off).
3. Once the mode has been selected, press the ENTER button to set it (or, to
return to a higher level of the menu structure without any change press the
MENU button).
Microphone sensitivity
To adjust the sensitivity of the sound-activation microphone:
1. Select
and press the ENTER button.
2. Use the DOWN and UP buttons to change the sound sense from 0 …100.
3. Once the level has been selected, press the ENTER button to set it (or, to
return to a higher level of the menu structure without any change press the
MENU button).
Blackout
You can blackout the fixture using the control menu:
1. Select
and press the ENTER button.
2. Use the DOWN and UP buttons to select YES (blackout) or NO (do not
blackout). Press the ENTER button to set (or, to return to a higher level of
the menu structure without any change press the MENU button).
LED display on/off
To set the LED display to be on all the time, or to automatically switch off when
not in use:
1. Select
menu and press the ENTER button.