RUSH PAR 1 RGBW user manual
24
Maintenance
Read Safety information on page 5 before maintaining the fixture.
Always comply with the safety instructions.
Refer any service operation not described in this user manual to
a qualified service technician.
Excessive dust, smoke fluid, and particle buildup degrades
performance, causes overheating and will damage the fixture.
Damage caused by inadequate cleaning or maintenance is not
covered by the product warranty.
Always disconnect mains power before cleaning or servicing the
fixture.
Fixtures must be serviced in an area where there is no risk of
anyone being injured by failing parts, tools or other materials.
Cleaning
The cleaning of external optical lenses must be carried out periodically to
optimize light output. Cleaning schedules for lighting fixtures vary greatly
depending on the operating environment. It is therefore impossible to specify
precise cleaning intervals for the fixture. Environmental factors that may result
in a need for frequent cleaning include:
•
Use of smoke or fog machines.
•
High airflow rates (near air conditioning vents, for example).
•
Presence of cigarette smoke.
•
Airborne dust (from stage effects, building structures and fittings or the
natural environment at outdoor events, for example).
If one or more of these factors is present, inspect fixtures within their first 100
hours of operation to see whether cleaning is necessary. Check again at
frequent intervals. This procedure will allow you to assess cleaning
requirements in your particular situation. If in doubt, consult your RUSH by
Martin dealer about a suitable maintenance schedule.
Use gentle pressure only when cleaning, and work in a clean, well-lit area. Do
not use any product that contains solvents or abrasives, as these can cause
surface damage.
