Runco XtremeProjection X-200i, Руководство по установке и эксплуатации

Страница: 61 / 118

Installation
Runco X-200i Series Installation/Operation Manual 45
PRE
L
IMINAR
Y
Whitney (Prismatic)
Anamorphic Lens
Installation and
Adjustment The Whitney Anamorphic lens mount kit consists of everything shown in Figure 3-20.
Some components shipped with your projector may differ slightly from what is shown in
these instructions.
Figure 3-20. Prismatic Anamorphic Lens Mounting Assembly - Exploded View
1. Use the Height/Pitch Adjustment Screws ( 3 ) and Washers ( 2 ) to attach the Lens
Mounting Bracket ( 5 ) to the Anamorphic Lens ( 1 ).
2. Remove the nut and rubber collar from each Swell Latch Assembly ( 4 ).
3. Secure the lens (with the mounting bracket attached) to the Lens Base Plate ( 6 ) using
the swell latches.
To avoid clipping the corners of the image, position the anamorphic
lens as close as possible to the primary lens.
3 Height/Pitch
Adju s tment
S crew,
4-40 x 1/4"
(4x)
4 Swell
Latch
Assembly
(2x)
1 Anamorphic Len s
2 Wa s her (4x)
6 Anamorphic Len s
Ba s e Plate
5 Anamorphic Len s
Mounting Brac k et
Tip