Runco XtremeProjection X-200i, Руководство по установке и эксплуатации

Страница: 85 / 118

Operation
Runco X-200i Series Installation/Operation Manual 69
PRE
L
IMINAR
Y
Blank S creen: Select Blank Screen from the System menu to choose the color of the
blank screen that appears when no source signal is present. The options are Black , Blue
and White . The default is Black .
Auto Power Off: Set Auto Power Off to On to have the X-200i turn itself off after 20
minutes of inactivity (no source signal present).
Auto Power On: Setting Auto Power On to On causes the projector to automatically
power up when AC power is present. If the projector is plugged into a switched AC outlet,
this allows the projector to be turned on using a wall switch instead of the remote control
unit. If you do not need this capability, set Auto Power On to
Off (this is the default
setting).
Projection Mode: This control reverses all images and menus, and is necessary when
the projector is used in rear-projection applications. This control also flips the image so the
projector can be used in ceiling-mounted installations.
The default is Front Tabletop , for installations where the projector is upright and in fron of
the screen.
Logo Display: This controls whether or not the Runco logo appears during startup.
Altitude: Select Altitude from the System Menu to control the operation of the projector’s
cooling fan.
In most cases, the default setting ( Auto ) will maintain the correct operating temperature. If
the lamp frequently turns off due to overheating, or in certain high-altitude operating
environments, you may need to change this setting to
High .
Power On Chime: This controls the audible chime at startup.
Frame Locking: This controls whether or not frame-locking is turned on for 2D sources.
(3D sources are always frame-locked.)