Runco XtremeProjection X-200i, Руководство по установке и эксплуатации

Страница: 65 / 118

Operation
Runco X-200i Series Installation/Operation Manual 49
PRE
L
IMINAR
Y
4.1
Selecting Video
Memory Press I S F NIGHT, I S F DAY, CU S T1 or CU S T2 to recall settings from a
memory preset. Then, press ENTER to confirm your selection. Or, to cancel the
operation, press to select Cancel and press ENTER .
4.2
Selecting an Aspect
Ratio To select the appropriate aspect ratio for the type of program
material being viewed, press one of the aspect ratio buttons. Or,
press the aspect ratio (
) button repeatedly.
For more information on aspect ratios, refer to Table 4-1.
4.3
Selecting An Input
Source When you turn on the X-200i, it switches to the last selected input and looks for
a valid signal.
Use these buttons on the remote control to select an input source directly, as
follows:
1 = HDMI 1
2 = HDMI 2
3 = Component 1
4 = Component 2
5 = RGB
4. Operation