Ruijie RSR10 Series, Руководство по установке оборудования

Страница: 94 / 104

Chapter 4 Starting and Configuring Router Installation Manual
4-2
4.1.2.2 Powering on Router
 Turn on the power switch of the router.
 Turn the router to the power on position.
4.1.2.3
Check after Power-on
After powering on the router, please check
 Whether the cooling system is normal
When the RSR20-14,RSR20-18 and RSR20-24 router with the fan is powered on, you
will hear the fan working. Put your hand near the air vent hole, you will feel the
movement of air.
 If the indicators on the front panel of the router are operating normally.
Check procedure: For RSR10-02 and RSR20-04, when the router is powered-on, the
Status indicator should be solid green when the router is working normally. For
RSR20-14, RSR20-18 and RSR20-24, when the router is powered-on, the System
indicator should be solid green when the router is working normally.
 Whether the configuration terminal displays normally
When the router is powered on, information on router software self-decompression will
appear on the terminal display.
4.1.3 Startup Process
When the router is started for the first time, the following information appears
***********************************************
System bootstrap ...
Boot Version: RGOS 10.3(4), Release(53498)
Nor Flash ID: 0x00010049, SIZE: 2097152Bytes
MTD_DRIVER-5-MTD_NAND_FOUND: 1 NAND chips(chip size : 33554432) detected
MTD_DRIVER-5-MTD_NAND_FOUND: 1 nand chip(s) found on the target.
Press Ctrl+C to enter Boot Menu ......
Main Program File Name rgos.bin, Load Main Program ...
Executing program, launch at: 0x00010000
Ruijie General Operating System Software
Release Software (tm), RGOS 10.3(4), Release(53498), Compiled Fri Apr 3 08:45:59 CST
2009 by ngcf31