Ruijie RSR10 Series, Руководство по установке оборудования

Страница: 89 / 104

Installation Manual Chapter 3 Installing Router
3-5
3.2.2 Mounting on the Workbench
In real environment, the standard 19-inch cabinet may be unavailable. More often the router
is placed on a clean workbench. This case is easy as long as you pay attention to the
following:
 Ensure that the workbench is stable and is properly grounded.
 The supplied plastic cushion is stuck to the small hole at the bottom of the router and a
room of 10cm is set aside around the router for dissipation.
 No weight is placed on the top of the router.
3.3 Installing the Power Cable and
Grounding Cable
Ruijie RSR 10(20) series routers support this AC power supply.
AC: 100–240V; 50/60Hz; 2A
Make sure that your power supply meets the requirement.
The power cable of the router is composed of three wires. You are recommended to use a
single-phase power socket with a natural connector or a multifunctional PC power socket.
The neutral point of the power supply should be reliably grounded in the building. For