Ruijie RSR10 Series, Руководство по установке оборудования

Страница: 12 / 104

Chapter 1 Product Overview Installation Manual
1-2
The SIC line cards are divided into 4 types, as shown in the following table.
SIC Type
Supported SIC line card
Class A
SIC-1A, SIC-8A, SIC-1B-U, SIC-1B-S/T, SIC-2FXS, SIC-2FXO
Class B
SIC-1HS,SIC-3G-TD, SIC-3G-CDMA, SIC-3G-WCDMA
Class C
SIC-1CE1, SIC-1E1-F
Class D
SIC-4ESW
The following table shows the SIC cards supported by the RSR10-02 slots.
Class A Class B Class C
Class D
Slot 1 √ √ √ √
Slot 2 √ √ √
Note
1. Once SIC-4ESW is inserted, the Eth0/1 on the panel is not available.
2. The SIC-3G-TD, SIC-3G-CDMA and SIC-3G-WCDMA can be inserted
into the SIC 1. The SIC-2FXS cannot be inserted into the SIC 2.
1.1.1.2
Highlights
 Access density and processing capability
RSR10-02 supports up to two non-channelized E1, two ISDN U or S/T interfaces, two
sync serial interfaces, two 3G interface cards, four Layer-2 switching Ethernet
interfaces and 16 asyn serial interfaces to provide the high-density remote OA solution.
The E1 interface complies with ITU-T G.703; the ISDN U interface complies with ITU-T
G.961 ANSI T1.601, and the ISDN S/T interface complies with ITU-T I.430. The sync
serial port can connect the networks such as DDN, frame relay, and X.25. These make
the router suitable as an access router for small/medium-sized branches.
 Reliability
Backup center technology greatly improving network reliability, various backup modes
available for high reliability requirements

Compatibility
Fully compatible with equipment of other suppliers
 Power supply
By using high-quality standard power supplies, it provides protection for surge,
overvoltage, undervoltage, overcurrent and other power problems to deliver stable and
reliable output, and supports transient power interruption protection.