Ruijie RSR10 Series, Руководство по установке оборудования

Страница: 92 / 104

Chapter 3 Installing Router Installation Manual
3-8
Caution
Pay attention to the following when you remove a line card:
1. When you have removed a line card and are not going to install another
one, install an empty panel in time to protect it against dust and ensure
ventilation.
2. When you remove a line card, keep it with some distance from the
passage in the working room to avoid any damage or accident due to
bumping during the removal process.
3.5.3 Troubleshooting
If the router fails to operate after you have installed a line card, please follow the following
steps:
 Check the interface cable of the module to see if the correct cable has been used.
 Observe the interface indicators of various modules to see if the module is working
normally.
 In privileged EXEC mode, view interface information. Check each line card has
accepted configuration and is operating normally.
3.6 Installation Check
When you have installed the router, before powering on it, do as follows:
 If the router is stalled in a cabinet, check the installation brackets of the cabinet and
router are fixed. If the router is stalled on the workbench, check there is enough room
around the router for heat dissipation and the workbench is fixed.
 Check the power supply meets the requirements.
 Check the grounding cable is correctly connected.

Check the router is connected correctly to other devices like the configuration terminal.