Cutting Centre SR 2 BiTurbo
7
•
in the funnel, e.g. to remove product.
Reaching into the machine or the funnel during operation is
strictly prohibited!
Any manipulation and bypassing of the safety devices is
strictly prohibited!
Staying under the lifting aid is strictly prohibited!
When moving the lifting aid for unloading it must be re-
membered that the upper box may not be lifted above the
worktable height!
Risk of slipping and falling due to spilled hydraulic oil!
Make sure the floor under and around the machine is free
from oil!
If the machine is unattended, the knife protection box must
be closed before leaving the workplace, the lifting aid
moved to its top position and the fork folded onto the work-
table!
When processing very watery products, spraying form the
funnel may occur in spite of installed slider! With such prod-
uct it is recommended to stand to the side of the funnel
when the machine starts.
!!! Maintenance
Touching electrical components may cause serious inju-
ries or death.
Work on electrical equipment of the machine may only be
carried out by qualified technicians! Always disconnect
machine from the mains during this process!
The protective covers (lids on front and rear, etc.) may be
removed only while performing maintenance!
Beware of hot surfaces, e.g. drives, hydraulic unit, etc.
during maintenance work!
Danger from pressurised and/or escaping hydraulic oil!
