Cutting Centre SR 2 BiTurbo
16
5
Service: care, maintenance, repair
Any work related to any kind of service may be carried out only by
Rühle service technicians and by persons authorised by Rühle in writ-
ing. In this regard, a distinction is made between regular care and
maintenance and repair. The respective qualification certificate must
be issued explicitly for the corresponding task.
Also follow the safety instructions in chapter 1.1!
Notify and obtain permission from Rühle customer service
if welding or cutting work is required on the machine!
Wear cut protection gloves when working on the blades!
Reaching into the inside of the machine by opening the
side covers is strictly prohibited when performing work
activities of
“Regular Care”
!
When working on the electrical equipment of the machine,
ensure that
•
this is only done by qualified personnel!
•
the machine is always disconnected from the power
supply!
•
a waiting time of at least 10 minutes is observed af-
ter switching off the machine to allow the capacitors
of the frequency and servo converters to discharge
to a harmless voltage level!
When working on the hydraulic system of the machine,
ensure that
•
this is only done by qualified personnel!
•
it is always disconnected from the mains!
•
it is depressurised!
•
the system must be vented after changing the oil or
individual components!
