Ruhle SR 2 BiTurbo, Оригинальное руководство пользователя

Страница: 15 / 22

Cutting Centre SR 2 BiTurbo
15
17900 Ökoron® SR Ecological cleaner
a
ci
d
1.0 – 5.0 15 – 20 20 – 55
d
a
ily
*) 13308, FINK –
Antisept G
Because of customer-specific application prohibitions, QAC-containing prod-
ucts are sometimes not used since the IFS standard must be met. Possible
alternative products would be, for example, FT 107 DES.
Supplier: FINK TEC GmbH, Oberster Kamp 23, 59069 Hamm, Germany
Tel. +49 2385-730 / info@finktec.com / www.finktec.com
4.3 Cleaning procedure
Please refer to the short instructions supplied with your machine for
carrying out the cleaning procedure.
The transport belt may only be dismantled after the cut-off
knife was removed from the machine!
Cleaning preparations:
•
To ensure optimum cleaning, some components of the machine
must be removed.
•
On the tablet PC first start the “Cleaning mode” program to move
the die plate to the cleaning position.
•
Remove any objects lying on the machine.
•
Remove the undercarriage with the Euro boxes from the lifting
aid and from beneath the cut meat discharge.
•
Remove the slider (funnel closure).
•
Remove the die plate.
•
Open the knife protection box.
•
Unscrew the handle nut.
•
Remove the cut-off knife and the grate frame with the knife lev-
els.
•
Remove the transport belt. Proceed as follows:
o
Open the quick-action tape clamp by jerking it upward and
then fold it onto the belt frame.
o
Reach with one hand under the belt to the feather key. Lift
it from the guide groove and remove the transport belt.
o
Remove the upper belt section.