Cutting Centre SR 2 BiTurbo
12
•
Commissioning
•
Maintenance activities
The machine may not be commissioned without transport
belt!
The following is strictly prohibited and failure to comply
represents gross negligence:
•
Lifting the lamellae of the protective guard on the
knife protection box during operation and reaching
into the cutting chamber!
•
Operating the machine without lids on the front and
rear!
•
Manipulating or deactivating the safety devices on
the machine!
Working on the machine without lids installed on the front
and rear is permitted only for a Rühle service technician
during maintenance phase!
The supervisor must be notified if hydraulic oil escaped
from the hydraulic cylinder is noticed in the funnel!
The operator must ensure that
•
No persons who do not know the hazards of the ma-
chine or cannot anticipate them are present in the
area of the machine!
•
When loading the lifting aid, the Euro boxes must be
stacked on an undercarriage suitable for this pur-
pose and moved with it onto the lifting aid to ensure
the Euro boxes are held securely!
•
The upper box on the lifting aid is not lifted higher
than the worktable!
•
The feather key is placed in the guide groove when
installing the transport belt!
The tablet PC may only be operated by touching it with
the fingers. Using any objects (e.g. blade) is prohibited!
