5. IP Network Interfaces
ROX™ v2.2 User Guide
79
RuggedBackbone™ RX5000
Figure 5.4. Explicitly Adding a VLAN Interface to a Switched Port
Procedure 5.1. Explicitly Adding a VLAN Interface at switch/vlans/static-vlan
1.
Go into Edit Private mode.
2.
Navigate to switch/vlans/static-vlan.
3.
Click on Add static-vlan. The Key settings form appears.
4.
In the VLAN ID field, enter a number from 1 to 4094 (for example, 2).
5.
Click Add.
6.
Click Commit.
7.
Click Exit Transaction.
The procedures below are examples of how to create implicit VLAN interfaces.
Procedure 5.2. Implicitly Adding a VLAN Interface at interface/switch/{port}
1.
Go into Edit Private mode.
2.
Navigate to interface/switch/{port}. The switch forms are displayed.
3.
On the VLAN form, type the PVID number into the PVID field.
4.
Click Commit.
5.
Click Exit Transaction.
Procedure 5.3. Implicitly Adding a VLAN Interface at interface/trunks
1.
Go into Edit Private mode.
2.
Navigate to interface/trunks.
3.
Click on Add trunks. The Key settings form appears.
