Rugby Manufacturing 1841488C | 13-Jul-20 Page 7
Rugby Manufacturing SR-Series Hoist Manual
Hoist & Sub-frame Assembly
A full breakdown of the hoist & sub-frame components can be found in the
Diagrams
section of this
manual.
1.
Slide the saddle shaft into the lower tube of the hoist so that approximately 4 inches extend past
the tube on each side. (
Figure 6
.)
2.
Position the hoist into the subframe by aligning each end of the saddle shaft into the subframe
brackets.
3.
Secure the saddle shaft to the sub-frame with the provided hardware as shown in
Figure 7
. Refer
to
Figure 3
for torque guidelines.
Figure 6
Figure 7
