Rugby Manufacturing 1841488C | 13-Jul-20 Page 6
Rugby Manufacturing SR-Series Hoist Manual
Assembly & Installation
Body Prop Installation
A body prop & required hardware is supplied with every SR-series hoist package. To determine
whether a second body prop is necessary for your application, refer to the
Body Prop Application
Chart
. For instructions on how to raise and lower the body prop, refer to the
Operation
section of
this manual.
The body prop is only to be used to prop an unloaded body. Serious
injury or death can occur if the body prop is misused.
Figure 5
1.
Insert the body prop into the body prop bracket. (
Figure 5
).
2.
Fasten the body prop to the body prop bracket using the supplied hardware.
3.
Lower the body prop to the down position & align with slot until the body prop rests
against the top of the holder.
