Hoist & Sub-frame Installation cont.
Rugby Manufacturing 1841488C | 13-Jul-20 Page 12
101010P1010101101010
Rugby Manufacturing SR-Series Hoist Manual
9.
Position the rear hinge brackets against the bottom side of the long beams. Once in position,
weld the rear hinge brackets to the body long beams as shown in
Figure 14
.
10.
Slide each lift bracket against the inside of the long beam channel. Then weld the lift bracket to
the outside of the long beam (
Figure 14
).
11.
With the lift bracket secured, slide the lock collars against the hoist lifting tube and lock them in
place by tightening the 3/8” set screw.
Figure 14
