Ruckus Wireless ZoneSwitch 4124, Руководство пользователя

Страница: 307 / 410

293
Command Line Interface
Diffserv Commands
diffserv policy
Enables (creates and configures) or disables (deletes) a diffserv policy. May define up to
128 policies for the switch. If more than 128 policies are created, a warning will prompt the
user and the new out-profiles will be ignored. Diffserve policy maps the classifier, in-profile,
out-profile, and no mach actions into a port list so some port limits may occur. Each Gigabit
port can be defined with up to 10 masks, 100 classifiers, 100 meters, 100 in-profiles, 100
out-profiles, and 100 policies. If any of the mentioned limits are reached, a warning will
prompt the user for the port and resource involved and the command will be ignored.
Command Mode: Global Configuration
Syntax
[no] diffserv policy <index> portlist <index> classifier <index> [in-
profile <index>] [out-profile <index>]
Description
■
<index>
- Sets the diffserv policy index ID.
■
portlist <index>
- Sets the diffserv policy port-list index ID.
■
classifier <index>
- Sets the diffserv policy classifier index ID.
■
[in-profile <index>]
- Sets the diffserv policy in-profile index ID.
■
[out-profile <index>]
- Sets the diffserv policy out-profile index ID.
■
no diffserv policy
- Disables (deletes) a diffserve policy.
Example
!Creates a diffserv policy Index 5, Portlist Index 1, classifier 4,
and in-profile Index 5.
Switch(config)# diffserv policy 5 portlist 1 classifier 4 inprofile 5
Switch(config)#
!Deletes diffserv policy on Index 5.
Switch(config)# no diffserv policy 5
Switch(config)#