Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
52
FIGURE 4-15
Changing a VLAN ID
This task should be performed by an experienced network administrator or are under the guidance of an IT/support
professional.
1
After logging into the Web User interface, click
VLAN
under Administrator.
The Administrator::VLAN workspace appears.
2
Clear the value in the VLAN ID column, and type the new value.
3
Click
Update Settings (test)
to verify connectivity prior to saving changes. This pre-
vents you from being locked out in the event you were to change the Management
interface VLAN ID.
Changing the port state for a VLAN
This task should be performed by an experienced network administrator or are under the guidance of an IT/support
professional.
1
After logging into the Web User interface, click
VLAN
under Administrator.
The Administrator::VLAN workspace appears.
2
Click a green check mark to change the state between member, non-member, or
tagged member.
ALERT
This works best in conjunction with
“Changing the port state for a VLAN”
and
“Changing an
RJ45 port’s VLAN tagged state”
for individual state changes.
