Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
22
Activating other Administrator Access Options
In addition to using the Web User interface to connect to the AP for management and moni-
toring purposes, you can also take advantage of these network access options:
• Telnet access
• Secure shell (SSH) access
This section shows you how to configure Telnet or SSH access, as well as how to direct your
web browser to the AP through an HTTP or HTTPS connection.
To take advantage of these options, follow these steps.
1
After logging into the Web User interface, click
Management
under Administrator.
The Administrator::Management workspace appears.
2
Review the options and make changes as needed
Telnet access
By default, this option is disabled (inactive).
Telnet port
This field lists the default Telnet port of 23—only if Tel-
net is active. You can manually change this port number
if required.
SSH access
By default, this option is enabled (active).
SSH port
This field lists the default SSH port of 22—only if SSH is
active. You can manually change this port number if
required.
HTTP access
This option is disabled by default.
ALERT
Do not undertake the customizing of these options unless you are an experienced network
administrator or are under the guidance of an IT/support professional.
FIGURE 3-4
