Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
23
HTTP port
This field lists the default HTTP port of 80, if HTTP has
been activated. You can manually change this port num-
ber if required.
HTTPS access
By default this option is enabled. This connection mode
requires a security certificate, a copy of which has been
preinstalled in the device.
HTTPS port
This field lists the default HTTPS port of 443—only if
HTTPS has been activated. You can manually change
this port number if required.
Certification Verification
This notes whether the security certificate linked to the
HTTPS settings has been passed or not.
3
Click
Update Settings
to save your changes.
A confirmation message appears at the top of the workspace.
Changing the IP Address
There are at least two instances when you would change the IP address of the AP:
• If the current AP IP address consistently conflicts with that of any other device in your
network
• If you want to switch to a static IP address from DHCP, for use in managing or maintaining
the AP
Unless you are able to determine the IP address assigned by the DHCP server to the AP, it
may prove helpful for anyone needing administrative access to assign a static IP address to
the AP.
To review and modify the network configuration, follow these steps:
1
After logging into the Web User interface, click
Internet
under Configuration.
The Configure::Internet options appear.
ALERT
Perform this task only in consultation with your Internet Service Provider.
FIGURE 3-5
