18
Preparing for Installation
Pointing the CMAP to ZoneDirector
If Only ZoneDirector Exists on the Network (With ZoneDirector Subcode)
1.
From Control Panel > Windows Administrative Tools, open
DHCP
, and then select the
DHCP server you want to configure.
2.
If the
Scope
folder is collapsed, click the plus (
+
) sign to expand it.
3.
Right-click
Scope Options
, and then click
Configure Options
. The General tab of the
Scope Options dialog box appears.
4.
Under
Available Options
, look for the
43 Vendor Specific Info
check box, and then
select it.
5.
Under
Data Entry
, highlight the existing values, and then press
<Delete>
on your
keyboard.
6.
Position your cursor again after the last octet (in this example, 0000) under the
Binary
text area, and then type
03
(the subcode for ZoneDirector).
Figure 10.
Under the Binary text area, type 03 (the subcode for ZoneDirector)
7.
After the ZoneDirector subcode (03), type the hexadecimal equivalent of the length of
the ZoneDirector IP address. For example, if the ZoneDirector IP address is
192.168.10.1
, the length in decimal is
12
and the hexadecimal equivalent is
0B
.
