11
Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
3.
If you made any changes to the
Common
tab that you want to save, click
Update
Settings
.
4.
Continue to
“Step 4: Configure the Wireless Settings”
below.
Figure 6.
The Configuration > Radio 2.4 > Common tab
Configure Wireless # Settings
1.
Click one of the
Wireless #
tabs.
2.
In
Wireless Availability
, click
Enabled
.
3.
In
Broadcast SSID
, click
Enabled
.
Country Code
• If you purchased the access point in the United States,
this value is fixed to
United States
at the factory and is
not user-configurable.
• If you purchased the access point outside of the United
States, verify that the value is set to your country or
region. Selecting the correct country code ensures that
the access point uses only the radio channels allowed in
your country or region.
NOTE: The two radios on ZoneFlex 7762 Access Point are
always configured with the same country code setting. If
you change the country code for Radio 2.4G, for example,
the same change will be automatically applied to Radio 5G.
Table 5.
Common wireless configuration
Setting
Recommended Value
