15
Preparing for Installation
Pointing the CMAP to ZoneDirector
Use SSH to Set the ZoneDirector IP Address on the CMAP
You can use SSH to set the IP address of the ZoneDirector device that you want to use to
manage the CMAP. Before starting this procedure, you must obtain the IP address of the
ZoneDirector device to which you want to assign the CMAP.
To perform this procedure, you will need the following:
■
An administrative computer
■
An Ethernet cable
■
A Telnet or SSH (secure shell) client program
To set the ZoneDirector IP Address on the CMAP via SSH
1.
Connect one end of the Ethernet cable to the administrative computer’s Ethernet port,
and then connect the other end to the CMAP’s Ethernet port.
2.
Change the administrative computer’s IP address to the same subnet as the CMAP.
The AP’s default IP address is
192.168.100.2
.
3.
Start the Telnet or SSH client program on the administrative computer.
4.
Log onto to the AP via Telnet or SSH using the following logon details:
•
User name:
super
•
Password:
sp-admin
5.
When command prompt appears, enter the following command:
set director ip {ip-address}
where
{ip-address}
is the IP address of the ZoneDirector to which you want to
assign the CMAP.
The following message appears, which indicates that you have assigned the
ZoneDirector IP address:
Please reboot for this change to take effect.
6.
Reboot the CMAP.
7.
Log onto the command prompt again, and then enter the following command:
get director info
The command prompt displays the IP address of the ZoneDirector device that is
managing the CMAP.
8.
Verify that this IP address is the same IP address that you set in
You have completed the setting the ZoneDirector IP address via SSH.
