Ruckus Wireless ZF7761CM, Руководство по установке, Страница: 11 / 52

7
Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
5. Click Use the following IP address , and then configure the IP address settings with
the values listed in Table 2 . For a sample configuration, refer to Figure 3 .
6. Click OK to save your changes and close the Internet Protocol (TCP/IP) Properties
dialog box.
7. Click OK again to close the Local Area Connection Properties dialog box.
Windows saves the IP address settings that you configured.
Figure 3. Sample configuration in the Internet Protocol (TCP/IP) Properties dialog box
Table 2. Configure your computer’s IP address settings
IP address
192.168.100.77
(or any address in the
192.168.100.x network — with the exception of
192.168.100.2
, which is already used by the access
point)
Subnet mask
255.255.255.0