Ruckus Wireless ZF7761CM, Руководство по установке

Страница: 14 / 52

10
Preparing for Installation
Preconfiguring the Access Point (Standalone Only)
Step 4: Configure the Wireless Settings
To complete this step, you will need to configure the settings on the Common tab and at
least one Wireless # tab. These are the essential wireless settings that will enable wireless
devices on the network to associate with the access point.
NOTE: ZoneFlex 7762 has one 2.4GHz radio and one 5GHz radio. The wireless settings
for each radio need to be configured separately on the Web interface (except for the
country code setting, see note in
Table 4 ). To configure the 2.4GHz radio settings, click
Configuration > Radio 2.4G . To configure the 5GHz radio settings, click Configuration
> Radio 5G .
For your reference, the default wireless settings on the access point are listed in Table 4 .
Configure Common Wireless Settings
1. On the left menu of the Web interface, click Configuration > Radio {2.5/5} G . The
Common page appears.
2. Verify that the common wireless settings are configured as listed in Table 8 .
Table 4. Default wireless settings
Setting Default Value
SSID (network name) Wireless 1 to Wireless 8 (8 WLANs)
Encryption (security) Disabled on all WLANs
Default management IP address
192.168.100.2
Table 5. Common wireless configuration
Setting Recommended Value
Wireless Mode Auto-select
Channel SmartSelect
Channel Width 20MHz or 40MHz