Ruby Tech VC-400RT+ Скачать руководство пользователя страница 92

Страница: 92 / 114

VC-400RT

Managed VDSL2 CPE Router MANUAL Ver. A5

4.14.1 IPv6 Setting

To enable or disable IPv6 functionality in CPE, click the

IPv6 Setting

link on the left navigation bar.

A screen is displayed as shown in Figure 4.14.1. By default IPv6 is not enabled.

Figure 4.14.1 IPv6 Setting

The system wide IPv6 feature can be enabled or disabled through this web page. Select

appropriate control and click Apply button for making the change effective in CPE. All other IPv6

features in CPE would be in effect, only when this global IPv6 is enabled in CPE.

Fields in IPv6 Setting:

IPv6 Setting

Enable

Enable IPv6 functionality in CPE.

Disable

Disable IPv6 functionality in CPE.



Click Apply at any time during configuration to save the information that you

have entered.



Click CANCEL to exit from this page without saving the changes.

4.14.2 6RD Configuration

The VC-400RT+ supports IPv6 transition mechanism defined in 6rd (RFC 5569). To configure the

6RD configuration, click the

6RD configuration

link (

IPv6 > 6RD Configuration

) on the left

navigation bar. A screen is displayed as shown in Figure 4.14.2

Figure 4.14.2 6RD Configuration

Содержание VC-400RT+



















































































































Результаты поиска

Содержание VC-400RT+

Отзывы:

Ruby Tech VC-400RT+, Руководство пользователя, Страница: 92 / 114

Результаты поиска

Содержание VC-400RT+

Отзывы: