VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
109
8. Question:
We need to set up a default gateway on a NV-600 pair which are in Bridge mode, as they
want to manage the units from a different network.
Answer:
When the application is used within the LAN, the switch(bridged) mode is not
necessary to set up a gateway .However, if the application crosses various network
segments (LAN to WAN or WAN to LAN), you must set up a gateway to connect different
network segment.
Regarding how to configure a default gateway at switch(bridged) mode for crossing
various network segments , please refer to the section 4.8.1 for your reference.
Configuration gateway example from static routing:
Destination LAN IP: 0-0-0-0
Subnet Mask: 0-0-0-0
Gateway: 255-255-255-0
Note:
Static Routing functionality is used to define the connected Gateway between the
LAN and WAN.
9. Question:
Is it possible to use ADSL2 IP DSLAM with the VC-400RT+?
Answer:
VC-400RT+ support the ADSL backward compatible, therefore the VC-400RT+ can
connect to ADSL2 IP DSLAM(Annex B).
10. Question:
What can I do if I forgot my password.
Answer:
If you forgot your password, you must reset your router. Unfortunately this process will
change all your settings back to the factory defaults. To reset the router, locate the reset
on the rear panel of the unit. With the router powered on, use a paperclip to hold the
button down for over 5 seconds. Release the button and the router will go through its
reboot process. The default ip is 192.168.16.254. When logging in, the default username
and password both are “admin”.