VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
32
The screen contains the following details:
Fields in xDSL Status:
Field
Description
ATU-C System Vendor
Information
Displays the Vendor ID, Version Number and the Serial
Number of the ATU-C (DSLAM).
Status
Displays the status of the physical xDSL Line in terms of the
modem, mode selected, Trellis-Coded Modulation and the
Latency Type
Rate
Displays the data rate and the maximum attainable data rate
Information
Displays the information about the xDSL line, in terms of
Line Attenuation, Signal Attenuation, Signal to Noise Ratio
and other such parameters
Performance
Displays the performance figures of the physical xDSL line
4.6 Select “WAN”
You can view
WAN
link on the left navigation bar for WAN related settings. Select the “NAT”. The
menu below includes the sub-menus of
WAN Mode Selection, WAN Channel Config,
VLAN
Channel Config,
WAN Setting,
WAN Status,
DNS,
DDNS, and
OAM Configuration
. A screen is
displayed as shown in Figure 4.6.
Figure 4.6 WAN options
4.6.1
WAN Mode Selection
To configure the WAN Mode Setting, click the
WAN Mode Selection
(
WAN > WAN Mode
Selection
) on the left navigation bar. A screen is displayed as shown in Figure 4.6.1