VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
81
4.11.2
e Config, click the
Queue Config
link (
QoS > Queue Config
) on the left
Queue Config
To configure the Queu
navigation bar. A screen is displayed as shown in Figure 4.11.2
Figure 4.11.2 Queue Config
he screen contains the following details:
:
T
Fields in Queue Config - Upstream
Field
Description
Upstream/Down
stream
Selection tab for upstream/downstream Queue configuration.
Queue Name
This is the name of the queue configured in system.
Queue
Precedence
Precedence of Queue. (Lower values denote higher priority).
This specifies the nature of drop in case of congestion. The supported drop
algorithms
are DT (Drop
Drop Algorithm
Tail) or RED (Random Early Discard).
Scheduler
Algorithm
This is the queue scheduling algorithm used for the queue. The supported
queue
scheduling algorithms are SP (Strict Priority) or WFQ (Weighted Fair
Queuing).
Queue Weight
Valid for Weighted Queuing mode of scheduled queues.
Committed
Shaping Rate
Committed or Guaranteed Shaping Rate in Kbps or Percentage.
Peak Shaping
Rate
Peak or Maximum shaping rate (ceiling) in Kbps or Percentage.
Enable
This provides the status of queue entry. (Enabled or Disabled).
Action
Selection button for applying Modify or Delete action on selected queue.
Add
This button is used to add a new queue.
Delete
This button is used to delete the selected queue entry.
Modify
This button is used to modify the selected queue entry.