VC-400RT
+
Managed VDSL2 CPE Router MANUAL Ver. A5
77
4.10.3 Port Triggering
To configure Port Triggering, click the
Port Triggering
link (
NAT > Port Triggering
) on the left
navigation bar. A screen is displayed as shown in Figure 4.10.3
Figure 4.10.3 Port Triggering
The screen contains the following details:
Fields in Port Triggering:
Field
Description
Application
Name
Port Triggering Application Name
Trigger Start
Port
Trigger Port start range.
Trigger End
Port
Trigger Port End Range. In case of one port, the end and start both are
same.
Trigger
Protocol
Trigger Protocol - TCP, UDP or TCP/UDP.
External Start
Port
External Port Start range.
External End
Port
External Port End Range.
Open Protocol
Protocol to be opened from external input - TCP, UDP or TCP/UDP.
Enable
Enable or Disable of Port Triggering Rule.
Add
Add a Port Triggering entry.
Click Cancel to exit from this page without saving the changes.