RTS KP-4016 Скачать руководство пользователя страница 303 | Manualshive

Страница: 303 / 306

RTS KP-4016 Скачать руководство пользователя страница 303

Bosch Security Systems, Inc.

Technical Manual

F.01U.304.914

Rev. 05

APPENDIX D

Audio and Control Packages

Audio and Control Add-On Package

The Audio and Control Add-On Packages for the KP Series keypanels greatly expand your keypanel and intercom system
experience and capabilities. The Audio part of the package delivers voice messaging for when a user has stepped away from a
panel, additional OMNEO channels, additional equalization bands, and adjustable compression and noise gating. The Control
part of the package offers real-time control of keypanels from AZedit as well as from another keypanel. It also offers KP
Configuration from AZedit, allowing you to upload a keypanel configuration from one keypanel, make changes to the
configuration and then download it to one or multiple licensed keypanels across your system. In addition, it includes two ways
of customizing the keypanel with downloadable chimes and downloadable screen savers.

Below is a chart detailing what is included with each package.

IMPORTANT:

If you are upgrading the KP-4016/5032 from version 1.1.1 or earlier to version 1.2.0 or later, you must

do the following:
• Download the Firmware
• Download the License, if purchased.
• Download the Voice Mail Chimes (downloaded with vm-chimes.mot)
• Download the Voice Mail Icons (downloaded vm-icons.mot)

For more information on downloading firmware, see “Download Firmware to the Keypanel From
AZedit” on page 161.

Take note, the VM chimes and VM icons are .mot files ad should be treated as firmware downloads, not
Chimes or Icons.

Panels shipped from the factory with v1.2.0 or higher, include VM Chimes and VM icons.

Audio Package

Control Package

•

Additional OMNEO Channels 3 – 8

•

Downloadable Screen Saver (See “Download Screen
Savers (Control Package Only)” on page 181.)

•

Voice Messaging (See “Voice Messaging (Audio
Package Only)” on page 68.)

•

Real-time Control (See “Real-Time Control in AZedit
(Control Package Only)” on page 99.)

•

Adjustable Compression (See “Compression” on
page 189.)

•

Keypanel Mirroring Mode (See “Keypanel Mirroring
(Control Package Only)” on page 96.)

•

Adjustable Noise Gating (See “Noise Gate – Audio
Package Only” on page 199.)

•

Keypanel Configuration (See “Keypanel
Configuration (Control Package Only)” on page 109.)

•

5-band Equalization (See “Adjustable 5-Band
Equalization – Audio Package Only” on page 192.)

•

Downloadable Chimes (See “Download User Chimes
(Control Package Only)” on page 179.)

«
...
301
302
303
304
305
...
»

Содержание KP-4016



















































































































































































































































































































Отзывы:

Нет отзывов