RTS KP-4016 Скачать руководство пользователя страница 202

Страница: 202 / 306

202 KP-4016/5032 Menu System

KP Series

Bosch Security Systems, Inc.

Technical Manual

F.01U.304.914

Rev. 05

Type

Available selections for the Type menu are:

Auto-Detect (default)

The keypanel automatically detects the type of microphone connected.

Dynamic

Electret

configure the Headset Mic Auto-mute

, do the following:

Starting at the Audio Options menu, select

Headset Mic

Press the

SEL button

Front and Rear appear in the panel display.

Using the right or left arrow buttons, select

Front

Rear

Press the

SEL button

Auto-Mute, Mode, and Type appear in the panel display.

Using the right or left arrow buttons, select

Auto-Mute

Press the

SEL button

Disabled and Enabled appear in the panel display

Using the right or left arrow buttons, select

Disabled

Enabled

Press the

SEL button

An arrow appears next to the selected option

configure the Headset Mic Mode,

do the following:

Starting at the Audio Options menu, select

Headset Mic

Press the

SEL button

Front and Rear appear in the panel display.

Using the right and left arrow buttons, select

Front

Rear

Press the

SEL button

Auto-Mute, Mode, and Type appear in the panel display.

Using the right and left arrow buttons, select

Mode

Press the

SEL button

Disabled, Enabled, and Switched appear in the panel display

Using the right and left arrow buttons, select

Disabled

Enabled

, or

Switched

Press the

SEL button

An arrow appears next to the selected option

configure the Headset Mic Type

, do the following:

Starting at the Audio Options menu, select

Headset Mic

Press the

SEL button

Front and Rear appear in the panel display.

Using the right and left arrow buttons, select

Front

Rear

Press the

SEL button

Auto-Mute, Mode and Type appear in the panel display.

Using the right and left arrow buttons, select

Type

Press the

SEL button

Auto-Detect, Dynamic, and Electret appear in the panel display

Using the right and left arrow buttons, select

Auto-Detect

Dynamic

Electret

Press the

SEL button

An arrow appears next to the selected option

Содержание KP-4016



















































































































































































































































































































Результаты поиска

Содержание KP-4016

Отзывы:

RTS KP-4016, Техническое руководство, Страница: 202 / 306

Результаты поиска

Содержание KP-4016

Отзывы: