manualshive.com logo in svg

RTS KP-4016, Техническое руководство, Страница: 203 / 306

Поделиться
Скачать
RTS KP-4016 Скачать руководство пользователя страница 203

KP Series

KP-4016/5032 Menu System  203

Bosch Security Systems, Inc.

Technical Manual

 F.01U.304.914

Rev. 05

Audio Options Menu, Headset Speaker

The 

Headset Spkr 

menu option is used to control the headset detection functions: auto-transfer, which is used to detect if a 

headset is present, and mode, which determines when and where audio is heard. Also from this menu, the Main shaft encoder 
is defined how to control the front and rear speakers. 

Volume Control

Available selections for the Volume Control menu are:

Ganged

The volume controls are tied to each other, only one knob is turned to adjust volume levels. 
The volume of both front and rear headset speakers are controlled together.

Individual

The volume controls are separate to each other.

NOTE:

If you gang speakers and/or headset volumes, you may see a split volume bar if the front and rear have different 

volumes with ganging is enabled. The front speaker or headset is the top portion of the bar, while the bottom 
portion of the bar is the rear speaker or headset volume.

To 

define how the Main Volume shaft encoder controls the volume for the front and rear channels

, do the following:

1.

Starting at the Audio Options|Headset Spkr menu, select 

Volume Control

.

2.

Press the 

SEL button

.

Ganged and Individual appear in the panel display.

3.

Using the left or right arrow buttons, select 

Ganged

 or 

Individual

.

4.

Press the 

SEL button

.

An arrow appears next to the selected option.

Auto-Transfer

Available selections for the Auto-transfer menu are:

Disabled

Enabled

When enabled, the keypanel automatically enters or leaves headset mode when a headset is 
plugged in or removed.

To 

configure the Headset Auto-Transfer function

, do the following:

1.

Starting at the Audio Options|Headset Spkr menu, select 

Front

 or 

Rear

.

2.

Press the 

SEL button

.

Auto-Transfer and Mode appear in the panel display

.

3.

Using the left or right arrow buttons, select 

Auto-Transfer

.

4.

Press the

 SEL button

.

Disabled and Enabled appear in the panel display

.

5.

Using the left or right arrow buttons, select 

Disabled

 or 

Enabled

.

6.

Press the 

SEL button

.

An arrow appears next to the selected option.

Содержание KP-4016



















































































































































































































































































































Отзывы:

Нет отзывов